Recently Drafted Manuscripts:

1.      Numerical modelling of inclusion motion behaviour in an ac flash butt welding process.

2.      Evaluation of temperature and Sulphur concentration effect on interfacial tension between molten microalloyed steel and alumina.

3.      Application of magnetohydrodynamics in process metallurgy: A review.

Book Chapter in Progress:

·         M. I. H. Siddiqui and M. H. Kim, “CFD simulation of melt and inclusion motion in a mold under the influence of electromagnetic force” Mechanics of Integrated Design and Simulations in Mechanical Engineering, Elsevier (2019).

A. Journals

1.   Dereje Degefa Geleta, M. I. H. Siddiqui and Joonho Lee, “Characterization of Slag Flow in Fixed Packed Bed of Coke Particles,” Metallurgical and Materials Transactions B. (Under review)

2.     M. I. H. Siddiqui and M. H. Kim, “Two-Phase Numerical Modeling of Grade Intermixing in a Steelmaking Tundish,” Metals, vol. 9, no. 1, pp. 40, 2019.

3.     M. I. H. Siddiqui and M. H. Kim, “Optimisation of flow control device dimensions to minimise the mixing in steelmaking tundish,” Journal of Mechanical Science and Technology, vol. 32, no. 7, pp. 3213-3221, 2018.

4.   M. I. H. Siddiqui and P. K. Jha, “Effect of Inflow Rate Variation on Intermixing in a Steelmaking Tundish during Ladle Change-Over,” Steel Research International, vol. 87, no. 6, pp. 733–744, 2016.

5.  M. I. H. Siddiqui and P. K. Jha, “Numerical simulation of flow-induced wall shear stresses in three different shapes of multi-strand steelmaking tundishes,” Steel Research International, vol. 86, no. 7, pp. 799–807, 2015.

6.   M. I. H. Siddiqui and P. K. Jha, “Numerical Investigation of Inclusion Behaviour in a Multi-Strand Tundish during Strand Blockages,” Journal of the Institution of Engineers (India): Series D, Vol. 96, No. 2, pp. 123-130, 2015.

7.      M. I. H. Siddiqui and P. K. Jha, “Assessment of turbulence models for prediction of intermixed amount with free surface variation using Coupled Level-Set Volume of Fluid Method,” ISIJ International, vol. 54, no. 11, pp. 2578-2587, 2014.

B. Conferences

1.      M. I. H. Siddiqui and Joonho Lee, “Numerical Modeling of Inclusion Motion Behavior in an AC Flash Butt Welding Process” The Korean Institute of Metals and Materials, International Conference, Daejon, South Korea, October 24-26, 2018.

2.      Jiseok Jeong, M. I. H. Siddiqui and Joonho Lee, “Evaluation of the Effect of Temperature and S Concentration on Interfacial Tension of Molten Steel and Alumina Inclusions in Micro-alloyed Steelmaking Process” The 12th Steel Science Forum, The Korean Institute of Metals and Materials, Pohang, South Korea, July 19-20, 2018.

3.      M. I. H. Siddiqui and Joonho Lee, “Numerical Simulation of Inclusion Particles Pushing and Engulfment Phenomenon in Solidifying Boundary Layer Under the Influence of Thermal and Concentration Gradient in a Welding Process” The Korean Institute of Metals and Materials, International Conference, Jeju, South Korea, April 25-27, 2018.

4.      M. I. H. Siddiqui, S. Ishaque and Man-Hoe Kim, “Numerical analysis of air flow distribution for a heat exchanger and its effect on condenser capacity in residential AC system” The Society of Air-conditioning and Refrigerating Engineers of Korea (SAREK) Conference, Kunsan National University, Gunsan, South Korea, April 2017.

5.      Maqusud Alam, M. I. H. Siddiqui, Man-Hoe Kim and Vineet Chak, “Numerical Modeling and Optimization of Steelmaking Tundish Design by using Response Surface Methodology” International Conference on Advances in Materials and Manufacturing, NIFFT, Ranchi, India, 2017.

6.      M. Farhan, M. M. Zubair and M. I. H. Siddiqui, “Effect of flow modifiers on the flow behaviour of inclusions in steelmaking tundish” 2nd International Conference on Recent Challenges in Engineering and Technology, SIT, CEE, Kolhapur, Maharastra, India, 2017.

7.      Parvesh Ali, Himmat Singh, R.S. Walia, Q. Murtaza and M. I. H. Siddiqui, “A Review-Development of Hybrid Abrasive Flow Machining” National Conference on Mechanical Engineering Ideas, Innovation and Initiatives, Aligarh Muslim University, Aligarh, India, pp. 246, April 16-17, 2016.

8.      M. I. H. Siddiqui, P. K. Jha and Shakeel A., “Effect of Molten Steel Inflow Rate on Grade Mixing in Tundish” National Conference on Mechanical Engineering Ideas, Innovation and Initiatives, Aligarh Muslim University, Aligarh, India, pp. 221, April 16-17, 2016.

9.      Masood A., Faisal. H., and M. I. H. Siddiqui, “Optimum Allocation of Machine Configurations for Multiple Objectives using NSGA-II, All India Manufacturing Technology, Design and Research (AIMTDR), Pune, 2016.

10.  R Kumar, A Maurya, M. I. H. Siddiqui and PK Jha, “Some studies in different shapes of tundish-intermixing and flow behaviour” 4th International Conference on Production & Industrial Engineering, NIT Jalandhar, Punjab, India, 2016.

11.  M. Alam and M. I. H. Siddiqui, “Optimization study of RTD parameters of a slab caster steelmaking tundish,” National Conference on Statistical and Analytical Methods in Production and Industrial Engineering, PEC University of Technology, Chandigarh, Feb. 12-13, 2016.

12.  Masood Ashraf, Faisal Hasan, M. I. H. Siddiqui, “Grouping of Part/Product Variants Based on Operation Sequence Similarity, International Conference on Advanced Production and Industrial Engineering, Delhi Technological University, New Delhi, India, December 2016.

13.  M. I. H. Siddiqui and P. K. Jha, “Multi-phase analysis of steel-air-slag system during ladle change-over process in CC tundish steelmaking process,” in Asia Steel International Conference, Yokohama, Japan, pp. 66-63, October 5-8, 2015.

14.  M. I. H. Siddiqui, Ambrish Maurya and P. K. Jha, “Physical Investigations of Grade Mixing Phenomenon in Delta Shape Steel-making Tundish,” in International Conference CETCME, NIET, Noida, India 2015.

15.  M. I. H. Siddiqui and P. K. Jha, “Numerical Investigation of Grade Intermixing and Heat Transfer during Ladle Change-Over in Steelmaking Tundish,” in 23rd International Conference on Processing and Fabrication of Advanced Materials, IIT Roorkee, Roorkee, India, pp. 981-993, 2014.

16.  W. Ahmad and M. I. H. Siddiqui, “Study of Grade Intermixing and Heat Transfer in Two Different Shapes of Tundishes,” in 23rd International Conference on Processing and Fabrication of Advanced Materials, IIT Roorkee, India, pp. 994-1009, 2014.

17.  M. I. H. Siddiqui and P. K. Jha, “Grade Mixing Analysis in Steelmaking Tundish using Different Turbulence Models,” in 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR, IIT Guwahati, India, pp. 1-6, 2014.

18.  M. I. H. Siddiqui and P. K. Jha, “Numerical Analysis of Heat Transfer and Flow Behaviour inside Different Shapes of Multi-Strand Continuous Casting Tundish,” in 2nd National Conference on Advances in Heat Transfer and Fluid Dynamics, AMU, Aligarh, India, 2013, pp. 65–72.

19.  M. I. H. Siddiqui and P. K. Jha, “Modelling of Molten Steel Interface and Grade Mixing in a Tundish Using VOF Model,” in Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India, 2013.

20.  R. Kumar, M. I. H. Siddiqui, and P. K. Jha, “Numerical Investigations on the use of Flow Modifiers in Multi-Strand Continuous Casting Tundish using RTD Curves Analysis,” in International Conference on Smart Technologies for Mechanical Engineering, DTU, Delhi, India, 2013, pp. 603–612.

21.  M. I. H. Siddiqui and P. K. Jha, “Effect of Tundish Shape on Wall Shear Stress in a Multi-Strand Steelmaking Tundish,” in International Conference on Smart Technologies for Mechanical Engineering, DTU, Delhi, India, 2013, pp. 122–130.